Architectural Speakers

Showing 49–72 of 214 results

Elac Vertex 3 IW-VJ63-M (Each)

219,990.00

Vertex III 6″ In-Wall, Crystal Cone, JET Folded Ribbon Tweeter, D2PR – IW-VJ63M

Elac Vertex 3 IW-VJ63-S (Each)

149,990.00
Vertex III 6″ In-Wall, Crystal Cone, JET Folded Ribbon Tweeter, 1D1PR – IW-VJ63S

Elac Vertex 3 OW-VJ63-L (Each)

249,990.00

Speaker type: 2 1/2-way, sealed cabinet Tweeter: jet folded ribbon
Woofer: 2 x 6-inch crystal aluminum sandwich cones, 4 x 6-inch crystal aluminum sandwich cone passive radiators
Crossover frequency: 450 Hz / 2,400 Hz Frequency response: 38 to 50,000 Hz
Sensitivity: 88 db at 2.83 v/1m
Recommended amplifier power: 40 to 200 Watts
Dimensions: Height: 46.61 in / 1184 mm – Width: 9.76 in / 248 mm Mounting Depth: 3.82 in / 97.0 mm

Elac Vertex 3 OW-VJ63-M (Each)

179,990.00

Speaker type: 2 1/2-way, sealed cabinet Tweeter: jet folded ribbon
Woofer: 2 x 6-inch crystal aluminum sandwich cones, 2 x 6-inch crystal aluminum sandwich cone passive radiators
Crossover frequency: 450 Hz / 2,400 Hz Frequency response: 42 to 50,000 Hz
Sensitivity: 88 db at 2.83 v/1m
Recommended amplifier power: 40 to 200 Watts
Dimensions: Height: 33.54 in / 852 mm – Width: 9.76 in / 248 mm Mounting Depth: 3.82 in / 97.0 mm

Elac Vertex 3 OW-VJ63-S (Each)

119,990.00

Speaker type: 2-way, sealed cabinet Tweeter: jet folded ribbon
Woofer: 1 x 6-inch crystal aluminum sandwich cone, 1 x 6-inch crystal aluminum sandwich cone passive radiator
Crossover frequency: 2,400 Hz Frequency response: 48 to 50,000 Hz
Sensitivity: 86 db at 2.83 v/1m
Recommended amplifier power: 40 to 120 Watts
Dimensions: Height: 20.47 in / 520 mm – Width: 9.76 in / 248 mm

Emotiva Vaulta (In-Ceiling Loudspeaker Pair)

54,000.00

High-frequency driver: 25 x 25mm Airmotiv folded ribbon tweeter; Low- frequency driver: 6-1/2 inch woven fiber cone mid/woofer with NBR roll surround; Nominal impedance: 8 Ohms; Efficiency: 85 dB; Power handling capability: 150 watts (Nominal)

F300LCR (Each)

26,900.00

The F300LCR is a compact on-wall loudspeaker bringing the performance and value of the F300 series to discrete home AV installation. The cabinet and driver arrangement hail from the well regarded F300c centre channel design, reducing cabinet depth to improve aesthetics on wall. Equally at home as stereo loudspeakers, a centre channel or for surround sound, the F300LCR deploys two 125mm mid/bass drivers and a 25mm polyester tweeter in D’Apolitto configuration for the widest sound stage. Crossing over at 80Hz and boasting high 90db/W efficiency, the F300LCR is ideal for budget home cinema installations.

Fa301 ic (Each)

19,900.00

Compact and powerful, Fyne Audio’s FA301iC is an affordable full range audiophile loudspeaker designed for easy installation in the home. Based on Fyne’s award winning F300 Series loudspeakers, this in-wall / in-ceiling model uses the same 150mm (6”) multi-fibre bass / midrange cone and 25mm polyester dome tweeter. The tweeter is mounted coaxially to the mid / bass driver and features an adjustable pod allowing you to direct the sound towards the listening position. With an install tuned crossover, easy-fit clamps, shallow 92mm depth and round low profile grilles (square grilles available as an optional extra), the FA301iC allows you to discreetly bring great sound to any room.

Fa302 ic (Each)

27,900.00

Stepping up to the potent 200mm (8”) multi-fibre bass / midrange driver and 25mm soft dome polyester tweeter, the FA302iC is a home installation powerhouse. High power handling, bass down to below 40Hz and adjustable tweeter pod to direct the sound give this model audiophile quality performance. Derived from Fyne’s larger F300 series models, the FA302iC feature the FyneFlute roll surround for improved bass detail and a high specification crossover tuned to get the very best from in-ceiling or in-wall position. Easy to fit clamps, spring cable terminals and a cut-out template make for easy install, and the round low profile magnetic grille (square grille available as optional extra) sits almost flush to the surface. The grille can be painted, enabling you to blend in or contrast with a wide variety of décor and room colours.

Fa501 ic (Each)

27,900.00

Detailed, refined and articulate, the FA501iC Home Install loudspeaker brings all the technology and sophistication of Fyne’s F500 series loudspeakers to discreet installations. Based on the 150mm (6”) Fyne IsoFlare driver, this audiophile-quality loudspeaker puts the series’ 25mm titanium done compression tweeter at the heart of multi-fibre bass/midrange cone with FyneFlute roll surround. The result is unsurpassed clarity and imaging, bringing all the benefits of full-range point source driver to a home install loudspeaker. With a crossover tuned to get the very best from a flush-mount infinite baffle position, and a shallow depth under 100mm, this compact speaker is ideal for in-ceiling or in-wall fitting. Complete with easy-to-fit clamps and both round and square low profile and fully paintable grilles, the FA501iC delivers high-performance sound while seamlessly blending into the room.

Fa502 ic (Each)

34,900.00

Delivering all the detail, impact and class-leading imaging of Fyne’s larger F500 series loudspeakers, the FA502iC brings true audiophile performance to home install loudspeaker design. Built around the F500 series prestigious 200mm (8”) IsoFlare point source driver with infinite baffle tuned crossover, the design offers high efficiency, high power handling and unique full range 360degrees isotropic dispersion pattern. The result is a rich, detailed sound with a wide soundstage and perfect time alignment across the frequency spectrum. Ideal for in-ceiling or hollow walls, the chassis offers simple self-aligning clamps, spring clamp cable terminals and comes supplied with both round and square, fully paintable low profile magnetic grilles. The grilles are further enhanced with an acoustic scrim cloth to ensure the FA50iC blends seamlessly into the home décor.

Fa502 ic LCR Angled (Each)

42,900.00

The LCR version of the prestigious FA502iC home install loudspeaker has been designed for installations where speaker placement is offset from the listening position. Ideal for Left, Centre and Right channels of home theatre systems, the 200mm (8”) IsoFlare driver is angled at 15 degrees to the mounting surface. The driver can be orientated in the round cut-out to angle the output directly towards the main listening position. With the same easy fitment, power and performance benefits of the standard FA502iC, the LCR model builds on the range’s versatility and is supplied with a paintable, low profile round grille.

Fonestar Sonora 4N / 4B

10,990.00

Surface-mounted speaker

Fonestar Sonora 5TN / TB

15,990.00

Surface-mounted speaker with low-impedance 100V line transformer

Fonestar Sonora 6B / 6N

21,990.00

Low impedance loudspeaker.
Prepared for outdoor use, with IP-66 protection.
Colour Option : Blanco/Negro (White/Black)

Fonestar Sonora 6TN / TB

23,990.00

2-way speaker system with excellent sound, also suitable for outdoor use (IP-66) * 60/30/15/7.5W for 100V and 60W/8Ω * Price per piece

Heco Ambient 11 F Pair (Satin black / Satin white)

47,900.00

 ? Design: 2-way
? Sensitivity: (1W/1M): 87dB
? Equipment: 1 x 4? woofer-midrange, 1? dome-tweeter
? Impedance: 4 ? 8 Ohms
? Power Handling (RMS/MAX): 50/90 Watts
? Frequency Response: 62Hz – 42.5 kHz
? Recommended Amplifier Output: 20 – 80 Watts

Heco Ambient 22 F Each (Satin black / Satin white)

32,900.00

 ? Design: 2-way, bass reflex
? Sensitivity: (1W/1M): 88dB
? Equipment: 1 x 5? woofer-midrange, 1? dome-tweeter
? Impedance: 4 ? 8 Ohms
? Power Handling (RMS/MAX): 70/120 Watts
? Frequency Response: 50Hz – 42.5 kHz
? Recommended Amplifier Output: 20 – 120 Watts

Heco Ambient 44 F Each (Satin black / Satin white)

44,900.00

 ? Design: 2-way, bass reflex
? Sensitivity: (1W/1M): 90dB
? Equipment: 2 x 5? woofer-midrange, 1? dome-tweeter
? Impedance: 4 ? 8 Ohms
? Power Handling (RMS/MAX): 80/140 Watts
? Frequency Response: 45Hz – 42.5 kHz
? Recommended Amplifier Output: 20 – 140 Watts

Heco INC 262 Stereo Pair (white (lacquerable))

34,900.00

 ? Power-handling capacity: 80 / 150 W
? Impedance: 2 x 4 ohms
? Frequency response: 36Hz ? 28 kHz
? Recommended amplifier output: 30 ? 160 W
Sensitivity: (1W/1M): 90dB
? External dimensions: 228 mm
? Hole cut-out: 193 mm
? Mounting depth: 75 mm

Heco INC 62 Pair (white (lacquerable))

25,900.00

 ? Power-handling capacity: 80 / 150 W
? Impedance: 4 ohms
? Frequency response: 36 Hz ? 28 kHz
? Recommended amplifier output: 30 ? 160 W
? Sensitivity: (1W/1M): 90dB
? External dimensions: 228 mm
? Hole cut-out: 193 mm
? Mounting depth: 73 mm

Heco INC 82 Pair (white (lacquerable))

30,900.00

 ? Power-handling capacity: 100 / 180 W
? Impedance: 4 ohms
? Frequency response: 34 Hz ? 28 kHz
? Recommended amplifier output: 30 ? 180 W
? Sensitivity: (1W/1M): 91dB
? External dimensions: 271 mm
? Hole cut-out: 237 mm
? Mounting depth: 88 mm

IWO 601 (pc)

13,110.00

The IWO 601 is a great sounding , shallow profile, small speaker. Employing high quality transducers and optimised crossover, it produces detailed, room filling sound from an enclosure that is less than 4″ deep. The 601 disappears into your room. The great sound remains.

IWO 602 (pc)

15,730.00

The IWO 602 is a 2 way design that is more powerful and louder than the IWO 601. While retaining the signature IWO sound, the IWO 602 will allow you to get a better overall loudness than the IWO 601. Importantly since it has a higher power handling and low frequency extension, there is better integration with the overall sound system also.

OUR ADDRESS

Auditro Hi Fi Systems

113A, Matheswartala Road, (Inside iLead Campus), Tangra Kolkata, 700046 

Email:  [email protected]
Phone:  +91 98747 00058

Whether you’re looking for answers, would like to solve a problem, or just want to let us know how we did, we are interested in hearing from you.